Lynx
RCKE tester for pairs and quads
This testing system has been developed especially for intermediate testing during the manufacturing process. The pairs or quads specifications can thus be controlled at regular intervals. The analysis of the results provides data for process control, product traceability or any other statistical information. Its measuring accuracy as well as its ease of use make it a state-of-the-art, high performance instrument which is user-friendly thanks to his touchscreen. Its capacitance bridge with a choice of three switchable frequencies allows you to measure also long distance cables.
Advantages
- Touchscreen
- High accuracy
- Long distance measurements
- Compact
- Inexpensive
- State-of-the-art
- Easy to operate
Components:
- One LF measuring unit
- One touchscreen allowing the capture of measuring parameters and the reading of measured values
- Two inputs for monopliers
- One USB output to connect a printer
General technical specifications
Resistances :
Partial resistances : Ra, Rb, Rc, Rd
Loop resistances : R1, R2
Resistive unbalances : DR1, DR2, DR3
Accuracy : ± 0.1% ±10 mOhms
Scales : 0-20'000 Ohms
Mutual capacitances : C1, C2
Phantom capacitance : C3
Accuracy : ± 0.25% ± 10 pF at 800 Hz / ± 0.25% ± 10 pF at 125 Hz / ± 0.25% ± 50 pF at 12.5 Hz
Scales : 0-600 nF at 800 Hz / 0-2000 nF at 125 Hz / 0-5000 nF at 12.5 Hz
Capacitance unbalances within a quad : K1, K2-3
Unbalances to ground : E1-3
External unbalances : Ea1-3, Ei1-3
Accuracy : ± 1% ± 6pF at 800 Hz / ± 1% ± 3 pF at 125 Hz / ± 1% ± 30 pF at 12.5 Hz
Measuring frequencies : 800, 125 and 12.5 Hz
Power supply : 90-130 VAC or 180-260 VAC
Consumption : 25 W
Dimensions : 390 x 390 x 250 mm
Weight : 12 kg
Deliver with
- One monoplier with self-cutting knives or mechanical
- One power cable 220 V
- One user’s manual
